Viewing the Module Settings: Version Information

The software (firmware) for the ports on the interface module must match that on the HelixNet Main Station itself.

Note: Ethernet and fiber option modules do not contain software.

To check the software version for the Main Station and each port on the interface module:

  1. In Menu mode, select Administration > Software > Current.

  1. In the fourth menu, use the rotary control to scroll the displayed software versions.

  2. The software versions for each port are listed under Snx, where n indicates the slot number, and x indicates port A or port B.

The software versions for the two processors in the Main Station (Main Station and IV-Router) are listed under MS and IVR respectively.